All you need to know about Rabbit Tattoo:

December 20, 2022 Sahil

Rabbit Tattoo is a common and necessary practice conducted by breeders to identify their rabbits during the breeding season. It is a common and popular form of identification of rabbits.

During breeding or if your rabbits are supposed to perform on television shows, getting the rabbit a tattoo under its ear is mandatory.

This article is solely dedicated to all rabbit owners looking for guidance on the best way to tattoo their bunnies.

Things you should be aware of:

What are Tattoo Pliers? Tattoo Pliers are the most commonly devised tools used to pierce the pores and skin of the ear with the needles of the tattoo digits. (digits may be each number and letter.) The pliers are clean to perform as they’re squeezed collectively with the ear between the digits and the rubber backing pad of the device. The digits need to fully penetrate the ear. Ink is then rubbed into the puncture holes.

The ink turns permanently fixed inside the area within the tissue of the skin because the puncture marks heal, making the tattoo legible and everlasting. Pen-type tattoo units can be used but require more time and precision than tattoo pliers.

A safe tattoo kit: Clinical tools called Tattoo Pliers are used for positive, permanent cattle identity. Our pliers are designed for ease of use and minimal hand fatigue when tattooing. Comprised of an aluminum alloy, pliers are sturdy but lightweight. Construction presents a brief clean pull causing needles to penetrate deeply into the ear with a minimum amount of effort.

How to prepare your bunnies for the procedure of tattooing:

Being a rabbit parent, you should know the entire tattooing procedure. Tattooing your rabbits is a sensitive matter. Therefore, you need to ensure the method is carried out correctly.

Disinfect the pliers and tattoo digits with the isopropyl alcohol.
Select the tattoo digits for the rabbit.
Position the digits effectively in the pliers and look at the intended tattoo on a piece of paper to ensure the digits are accurate.
The region of the rabbit inside the proper tattooing position. One person should keep the rabbit at the same time as another individual is tattooing.
Use disposable gloves to handle the ink; ink can temporarily stain hands.
Examine the place in which the tattoo can be placed. The tattoo should be placed above the primary visible vein in the ear.

Keep in mind that big your rabbit has very warm ears and may bleed quite excessively. If the ear is very hot, dip a towel in cold water and place it on the ears until it is cool.

Thoroughly clean and dry the ear earlier than making use of the tattoo.
Make sure the ear is straightened with no folds when applying the tattoo.
Continuously rub the ink into the puncture holes. Use a cotton swab or finger to work the ink into the puncture holes.
So now, do not do away with excess ink. It will be absorbed inside the ear, usually inside every week.
Apply a light film of petroleum jelly over the tattoo. Petroleum jelly will temporarily seal the holes while the puncture holes soak up the ink as they heal.
Make sure the tattoo artist disinfects the tattoo pliers and digits with isopropyl alcohol before touching your rabbit to make sure no infection is spread.

Concluding, we would like to state that if you are a breeder or a bunny parent, tattooing your rabbit is essential.

As an owner,, you must be careful and stay attentive during the entire procedure to ensure your bunnies are taken care of properly.