Installing Electric Showers with Easy Steps

You don’t need a hot water tank or storage for installing electric showers. They function by heating cold water in their tiny tanks and preparing hot water whenever you unplug the shower. For your information, electrical showers must be linked to a separate electrical circuit whenever electricity is needed. Their heating elements in electrical showers work very well and heat water in high degrees.

Replacing a regular shower with an electric shower is a cost-effective choice for older buildings or wherever gas boilers are not available to use. They are a good choice for old buildings because they don’t need any specific installation requirements. This article will help you to find out more about electric showers and the fundamental steps for installing an electric shower in your home.

We will define every step of electrical shower installation in 10 simple steps. They are general steps for installing any kind of electric shower. There are so many different types of electric showers with shapes and complex designs. Actual shower installation steps, in reality, may vary based on your electric shower and the model you picked. That is why we suggest searching and reading more about the exact model you bought. You can also ask for help from an expert in bathroom fitting and installation. They have enough experience to know how to install common types of electric showers.

How to install electric showers step by step

Step one – Check the electrical connections

First of all, make sure that you turned off the main electrical power supply. After that make sure you completely disconnect the water supply and the water stream is removed. To make sure if pipes are completely empty of water, open them and wait for seconds.

Step two – Remove the old shower unit

If you want to replace an old electric shower with the new one, after cutting off the electricity, you should remove the old shower unit to replace it with a new electric shower.

You can easily unscrew the old shower by using the screwdriver.

It would be best if you’ve done enough researches before any installation. Because electric showers need specific conditions in your house electrical and plumbing system

Step three – Understand the new shower mechanism

Look at the new electric shower and its instruction guide booklet. It helps you to understand more about the new shower mechanism and some tips to do it correctly. Some of the electric showers have multiple connections to allow easy installation and replacement.

Step four – Unscrew the new electric shower

For better understanding and preparing the installation progress, unscrew the front cover of the shower. This helps you to see the electrical connections within the unit at the same time you see water connections. It is better to prepare equipment before starting the installation.

Step five – Locate the best place for an electric shower

Find the best place that is functional for a daily shower depending on your bathroom area. You can easily tag the right place with a marker and then use a drill to make holes in the bathroom wall. Use wall plugs to secure screws in the wall. Double-check this step to prevent any changes after drilling.

Step six – Connect the water supply

For the next step, connect the water supply and after that electricity. Make sure you’re doing it right and safe. At any point, you feel uncertain about water or electrical connections, call a professional and ask to help you with electric shower installation.

Step Seven – disconnect again

For security purposes and preventing electric shocks, it’s better to disconnect the electricity and water supply again to continue installing process.

Step eight – Cover the unit

Now, after you connected the water supply and electricity, make sure everything works alright, try to fix bugs and problems if there is anything. After the simple analysis, cover the unit and screw the electric shower cover to install parts on the wall.

Step nine – Fit the new shower

It’s time to fit the shower itself. If there’s any hose or extra features come out with the electric shower packaging. Connect all the shower heads and plugs to complete electric shower parts.

Step ten – Complete the installation

When you are completely sure installation is over and everything is in a right place, turn the electrical system again. After that open the water supply and make sure every part of the electric shower working alright. If everything is okay, your installation is done.

Ask a professional to check the safety

Congratulation, you completed the electric shower installation process all by yourself. If you have any new problems with it, you can easily find the best electric shower installer in London. Our staff would help you to find the best option for your bathroom and help you with shower fitting. Remember if you already installed the electric shower by yourself, it should be approved by a certified technician to ensure everything is safe in your house to prevent any further accidents.

If you run into any unexpected issues during DIY installations, it’s better to contact a professional mid-project and ask for advice, or for them to take over. The safety of an electric shower installation in your bathroom is very important, and any mistakes could cost somebody’s life.